%53
CPPL 1BHF .POEBZ
4FQUFNCFS
1.
Controlling Other Components�Continued
Using Macros1While holding down the Remote
Mode button for the mode you
You can program the remote controller�s Macro buttons want to start with, press Macro
to perform a sequence of actions.
Example:button [1], [2], or [3].
The Remote indicator lights up.
To play a CD, you typically need to perform the follow-
ing actions:
1. Press the [Receiver] Remote Mode button to select For the CD example in the left column,
you�d press and hold the [Receiver]
the Receiver remote controller mode.Remote Mode button, and then press
2. Press the [On] button to turn on the AV receiver.
3. Press the [CD] Input Selector button to select the Macro button [1], [2], or [3].
CD input source.
4. Press the [CD] Remote Mode button to select the
CD remote controller mode.
5. Press the Play [ ] button to start playback on the
On the remote controller, press
CD player.2
the buttons whose actions you
want to program into the macro
You can program a Macro button so that all Ţve actions in the order you want them per-
are performed with just one button press.formed.
For the CD example in the left column,
Making Macrosyou�d press the following buttons:
[On], Input Selector [CD], Remote
You can make one macro for each Macro button, and Mode [CD], Play [ ].
each macro may contain up to eight commands.
3When you�ve Ţnished, press the
Remote Macro button again.
indicatorThe Remote indicator �ashes twice.
If you enter eight commands, the pro-
cess will Ţnish automatically.
Note:
� If one or more of the buttons you used to make a macro
are taught new commands, the macro will no longer
work properly and will have to be made again.
1, 3
Running Macros
1
Press the Macro [1], [2], or [3] button.
1
The commands in the macro are transmitted in the
order in which they were programmed. Keep the
remote controller pointed at the AV receiver until
all of the commands have been transmitted.
Macros can be run at anytime regardless of the
current remote controller mode.
Deleting Macros
1While holding down the [Receiver]
Remote Mode button, press the Macro
button whose macro you want to delete.
2Press the Macro button again.
88 |