Enjoying music or videos with the DTR-7.3
Input source buttons
Master Volume
RCVR
VOL /
Input Selector
buttons
Tape
Though the DTR-7.3 is often used to listen to the radio, it does not
3. Adjust the volume.
show you its true ability until it is used to play music or watch
videos, DVDs, and the like. The DTR-7.3 has the latest and mostDTR-7.3Remote controller
state-of-the-art features to play back todayOs technologies with the
utmost in fidelity and power. From a two-speaker system to a seven-
speaker system, you are assured a sound space that you can always
enjoy.
To ensure the proper sound space, you must first perform the
speaker setup settings. These settings allow you to set the type of
speakers you are using, the distance that they are located from
the listening position, and the individual speaker volumes. For
Adjusting the main volume adjusts the volume level of all the
more details, see Speaker Setup Sub-menu of the Setup Menu on
speakers connected to the DTR-7.3 together. If headphones are
page 43.
connected, this also adjusts the volume heard from the
headphone speakers. To adjust the volume, either press the VOL
buttons on the remote controller or turn the Master Volume
dial. To increase the volume, turn the dial clockwise; to decrease
Basic operation
the volume, turn the dial counterclockwise. The volume can be
set to Min, 0 to 100 (or �, �81 to +18 dB).
If you want to perform these operations using the remote controller,
first press the RCVR button.
1. Press the input source button (or Input Selector
button on the remote controller) that corresponds toTo change the display of the input source from
the source to which you want to listen.TAPE to MD
If you connected an MD recorder to the TAPE jack on the DTR-7.3,
DTR-7.3you can have OMD� appear when the Tape source button is pressed.
Changing the display:
Press and hold down the Tape source button until the display
changes from TAPE to MD (approx. 3 seconds).
Remote controller
2. Turn on the corresponding component and play the
media.
To return the display to its original setting, perform the same
procedure.
29 |